|
|
|
SI-120 marked directly into the material-even the hardest steels-, the mark (text,digit, logo and 2D data matrix) is produced by a tungsten-carbide pin that penetrates and indents the surface. These scribers produce deep grooves to form continuous lines.
Scribing marking machine is selected mostly for applications when noise level limitations are imposed.
Deep marking of its marking depth is between 0.3mm upto 0.5 mm depending on the material of surface.
For example, chassing marking on frame of vehicle could be considered noisy with a dot peen machine, whereas a pneumatic scribing machine could mark with less noise. It guarantees a permanent mark with the highest quality.
|
|
Specification |
|
|
Marking area |
90 X 80 mm |
Dimensions with connectors |
28cm(width) X 22.5cm(Length) X 15.5cm(Height) |
Weight |
15 KG |
Material of case |
Steel |
Move guide |
Ball Screw and LM Guide |
Motor |
STEPPING MOTOR |
Control Unit |
All available controllers |
Dust cover |
24 pins for connect cable |
|
|
|
|
Features |
- A Competitive price with good quality
- A Dust Cover; protect dust from bad environmental
- Able to be quiet marking (Only SI-03 pin)
- A variable and easy installing to customer(s) own systems
- Able to use SI-03 pin and PH pins
- A customer OEM installation or with T-300 table
|
|
Marking Pin Specification |
Long Stroke Pin |
Size |
Weight |
Marking Dep |
Stroke |
Distance from work piece |
Appo.
Air |
Pin
life time |
Compatiable head |
Pin |
Holder |
LP-06 |
6 x 55mm |
33.5 x 50mm |
0.1kg |
0~0.2mm |
4~10mm |
7mm |
3 bar |
1,000,000 Cha. |
Any heads |
LP-10 |
10 x 70mm |
33.5 x 65mm |
0.1kg |
0~0.4mm |
4~15 mm |
10mm |
3 bar |
1,000,000 Cha. |
Any heads |
LP-15 |
10 x 110mm |
33.5 x 105mm |
0.1kg |
0~0.4mm |
4~15 mm |
10mm |
3 bar |
1,000,000 Cha. |
Any heads |
High Speed Pin |
Size |
Weight |
Marking Dep |
Stroke |
Distance from work piece |
Appo.
Air |
Pin
life time |
Compatiable head |
Pin |
Holder |
PH-16 |
16 x 75mm |
31 x 70mm |
0.1kg |
0~0.3mm |
4~5mm |
3mm |
4.5 bar |
1,000,000 Cha. |
Any heads |
Scratch Pin |
Size |
Weight |
Marking Dep |
Stroke |
Distance from work piece |
Appo.
Air |
Pin
life time |
Compatiable head |
Pin |
Holder |
SI-120 |
6 x
55mm |
33.5 x 55mm |
0.2kg |
0~0.2mm |
2~3mm |
2mm |
2~
2.5bar |
1,000,000 Cha. |
SI-120 |
Power pin |
Size |
Weight |
Marking Dep |
Stroke |
Distance from work piece |
Appo.
Air |
Pin
life time |
Compatiable head |
Pin |
Holder |
PLP |
10 x 70mm |
33.5 x 65mm |
0.1kg |
0~0.4mm |
4~15mm |
10mm |
3bar |
1,000,000 Cha. |
Any heads |
HLP |
Size |
Weight |
Marking Dep |
Stroke |
Distance from work piece |
Appo.
Air |
Pin
life time |
Compatiable head |
Pin |
Holder |
HLP |
8mm X
73mm |
33.5 X
68mm |
0.2 kg |
0~0.5mm |
4~15mm |
10mm |
3.5~4.5bar |
1,000,000 cha |
Pneumatic
marking
heads |
Elec. Pin |
Size |
Weight |
Marking Dep |
Stroke |
Distance from work piece |
Appo.
Air |
Pin
life time |
Compatiable head |
Pin |
Holder |
EP-03 |
4π x 60mm |
35π x 80mm |
370g |
Depending on the meterial |
8mm |
3~8mm |
- |
1,000,000 Cha. |
MKP-054
MKP-054K
MK-300K |
|
|
|